Products

Modular Dry Cooler

Single module with 4 cores and 2 fans provides 200 kW From 1 to 5 modules available (up to 1000 kW) Low installation and transportation costs High reliability and high redundancy Easy maintenance and core cleaning New header for low pressure drops and high internal corrosion resistance Customized EC power absorption meter and optimization on request High corrosion resistance due to same tube and fin material High efficiency, minimal footprint Only 2 inlet, 2 outlet connections...

TKMicro Multi System Dual Flow

A solution of heat recovery and enhanced performance This new concept represents a revolution for heat recovery and is more than a valid alternative to conventional adiabatic systems. By using two circuits in micro-channel heat exchangers (MCHX), an additional cooler fluid can help to reduce the inlet air temperature and to recover part of the heat otherwise released completely into the atmosphere. This technology does not just enhance the performance of coolers and condensers, but also...

Super Power-J Dry Coolers

Super Power-J Dry Coolers Super Power- Dry Coolers Performance range: Capacity from 290 to 2219 kW (ethylene glycol 35%, Tw1=40°C, Tw2=35°C, T1=25°C) Fans: Diameter Ø 800, 900, 1000 mm, AC or EC motor Benefits: Maximum performance, minimum footprint High efficiency geometry Modular design, 8-20 fans 8 sound levels Piping in copper or stainless steel AISI 304 or AISI 316L Finned pack available in a wide range of materials Complete range of accessories AFS (Air Fresh System)...

Gas Cooler

The peculiar V-shaped structure of ThermoKey Gas Cooler allows to make the most out of the adiabatic system and reduce the overall dimensions of the installation. These units with the option of adiabatic air cooling allow an efficient operation even in regions where the ambient temperature could exceed 40 ° C, reducing the blocking chance of the refrigeration systems, commercial refrigeration (supermarkets) and industrial refrigeration (production, packaging and distribution). The control...

Process Dual Flow Unit Cooler

process dualflow unit cooler ThermoKey process dualflow unit cooler. To prevent heat from being lost and flowing towards the cold room during the defrosting stage and to prevent, while the unit cooler is working, the external drip tray from cooling. Area of use: processing rooms Performance range: Direct Expansion operation: capacity up to 115 kW(R404A, Te= -8° C, T1= 0° C, RH = 85%). Brine Operation: capacity up 160 kW(Glycol 30%, TW1= -10 °C, T1= 0 °C, RH = 85%). Ammonia...

PowerGen Radiator

PowerGen Radiators would be the ideal solution for power plant owners and contractors. It is designed to meet the specific needs of the electricity production market, which requires particularly rigorous quality standards. Some of the possible applications for this system: large electricity production plants, small electricity generators for limited energy use, small biogas plants for agricultural producers, geothermal plants. Thermokey PowerGen Radiator Area of use: Electricity...

Power-J (V-Tower) Dry Cooler

The Power-J (V-Tower) is a series of drycoolers that can be equipped with the EPS adiabatic system. The EPS (Evaporative Panel System) is an adiabatic system with evaporative panels to reach higher specific capacity compared to a traditional Dry Cooler. The adiabatic system can operate in two ways: Water Saving: increased specific capacity when using H2O – (H2O when engine at maximum). Energy Saving: energy saving to help the fan (H20 immediately). The Power-J (V-Tower)satisfies the VDI...

Microchannel water core

TKMicro is the best solution for HVAC/R. WHY? Thanks to a thorough know-how of air-cooled units ThermoKey is able to develop new products and customized solutions in synergy with its customers. ThermoKey has invested in a state-of-the-art production process both for small batches and large series production. PRODUCTION ThermoKey is a leading company in the production of Microchannel cores in Europe. Cores are used by the main European chiller manufacturers/OEM as...

Microchannel condensing core

Round Tube Coils

Thermokey offers a complete range of finned heat exchangers for air conditioning, custom designing the sizes of both the finned surface as well as the circulation, to satisfy the client’s every need. Refrigeration: used to cool civil and industrial environments, such as theatres, hospitals, offices, hotels, airports and cold rooms. Cooling/ Heating: make the most of the heat exchange between fluid and air and are used to regulate the temperature of process fluids. Used, for example, in the...

Hen Unit Coolers

Area of use: Potato and vegetables storage Performance range: Capacity from 40 to 143 kW (R404A, Te = -5 °C, T1= 0 °C, RH = 90%) Fans: Diameter Ø 800 high prevalence with differents ESP value Benefits: Modular design, 2-4 fans Fin spacing 7 mm Electric defrosting system available on request Solid frame in galvanized steel

Radial Unit Coolers

Area of use: Air ducting Performance range: Direct Expansion operation: capacity from 10 to 115 kW (R404A, Te= 2° C, T1= 12° C, RH = 75%) Brine Operation: capacity from 7 to 135 kW (Glycol 30%, TW1= 0 °C, T1= 12 °C, RH = 75%) Fans: Radial ducted fans, Diameter Ø 560, 630 mm Benefits: Fin spacing: 4.5 mm or 7 mm Piping in copper or in AISI 304 stainless steel External static 150 Pa pressure Modular design, 1-4 fans Electric defrosting system available on request Casing in...

Fruit Coolers

Area of use: Cold rooms specific for the preservation of fruit and vegetables Performance range: Capacity from 21 to 50 kW (R404A, Te = -8 °C, T1= 0 °C, RH = 85%) Fans: Diameter Ø 400 and 450 mm Benefits: Modular design, 3-6 fans Fin spacing: 6 mm Electric defrosting system available on request Solid frame in galvanized, RAL9010 painted steel

Blast Freezer Unit Coolers

Area of use: Cold rooms specific for either product cooling or fast freezing Performance range: Capacity from 14 to 107 kW (Te = -40 °C, T1 = -35 °C, RH = 90%) Fans: Diameter Ø 630 mm Benefits: External static 100 Pa pressure (standard); can reach 400 Pa with special tubular fans Piping in copper or in AISI 304 stainless steel Finned pack available in a wide range of materials Fin spacing: 12 mm Various defrosting systems available Casing: available in aluminium, in AISI 304...

Industrial Dual Flow Unit Coolers

Area of use: Medium and large cold rooms and large refrigerated warehouses to preserve fresh or frozen products Medium and large processing rooms Performance range: Direct Expansion operation: capacity up to 115 kW (R404A, Te= -8° C, T1= 0° C, RH = 85%) Brine Operation: capacity up 160 kW (Glycol 30%, TW1= -10 °C, T1= 0 °C, RH = 85%) Ammonia Operation: capacity up 170 kW (NH3, Te= -8 °C, T1= 0 °C, RH = 85%) Fans: Diameter Ø 500-560-630 mm, AC motor. Benefits: Modular design, 1-5...

Industrial Unit Coolers

Area of use: Medium and large storage cold rooms or refrigerated warehouses, for the preservation of fresh and frozen products, for aging process, for long time preservation in medium and large processing rooms. Performance range: Direct Expansion operation: capacity from 7 to 209 kW (R404A, Te= -8° C, T1= 0° C, RH = 85%) Fin spacing: 4.5 -7 - 11 - 12mm Brine Operation: capacity from 7 to 240 kW (Glycol 30%, TW1= -10 °C, T1= 0 °C, RH = 85%) Fin spacing: 4.5 - 6 - 8 - 12mm Ammonia...

Commercial Dual Flow Unit Coolers

Area of use: Small and medium cold rooms to preserve fresh or frozen products Small and medium processing rooms Performance range: Capacity from 1,5 to 20 kW (R404A, Te = -8 °C, T1= 0 °C, RH = 85%) Fans: Mono-phase, Ø 350 mm Benefits: Modular design, 1-4 fans Fin spacing: 3 mm 6 mm Electric defrosting system available on request Casing: available in aluminium, in stainless steel AISI 304 or RAL9010 painted

Light Cubic Unit Coolers

Area of use: Small and medium cold rooms to preserve fresh or frozen products Performance range: Direct Expansion operation: capacity from 1,44 to 47 kW (R404A, Te= -8° C, T1= 0° C, RH= 85%) Brine Operation: capacity from 1 to 20 kW (Glycol 30%, TW1= -10 °C, T1= 0 °C, RH = 85%) Fans: Diameter Ø 300, 350, 400 and 450 mm Benefits: High efficiency in compact sizes Modular design, 1-4 fans Fin spacing: 4 mm, 6 mm or 8mm Solid frame in galvanized steel, cowlings in ABS (on request...

TKMicro V-Type Modular Remote Condensers

Performance range: capacity for each module: TKMicro 25: 148 kW TKMicro 32: 160 kW Fans diameter Ø 800 mm, AC or EC motor Modules from 1 to n

TKSmart (Light Remote Condensers)

Performance range: capacity from 13 kW to 98 kW(*) 1-4 Fans: diameter Ø 400, 500, 630 mm, AC or EC fans (*) Standard conditions - R404A, condensing temp: 40°C, subcooling: 3°K, desuperheat: 25°K, air temp: 25°C

V-Type Remote Condensers

Performance range: capacity from 90 kW to 870 kW (*) Fans: diameter Ø 800, 900 mm, AC or EC motor Units can be customized with a wide range of accessories (*) Standard conditions - R404A, condensing temp: 40°C, subcooling: 3°K, desuperheat: 25°K, air temp: 25°C

Table-type microchannel remote condenser

Performance range: Capacity from 10 kW to 480 kW(*) +30% capacity vs traditional condensers with the same footprint Modular design, 1-8 fans Reduced dimensions and weight Fans: diameter Ø 300, 400, 450, 500, 630, 800, 900 mm, AC or EC motor Units can be customized with a wide range of accessories (*)Standard conditions - R404A, condensing temp: 40°C, subcooling: 3°K, desuperheat: 25°K, air temp: 25°C

Turbo-J Condensers

Area of use: Gas condensation Performance range: Capacity from 100 to 1915 kW (R404A, Tc= 40 °C, T1= 25 °C) Fans: Diameter Ø 900 mm, AC or EC motor Benefits: Maximum performance, minimum footprint High efficiency geometry, Modular design, 2-16 fans Piping in copper or stainless steel AISI 304 Finned pack available in a wide range of materials Complete range of accessories, 8 sound levels AFS (Air Fresh System), WFS (Wet Fin System) and EPS (Evaporative Panel System) available...

Turbo-Line Condensers

Area of use: Gas condensation Performance range: Capacity from 10 to 1200 kW (R404A, Tc= 40 °C, T1= 25 °C) Fans: Diameter Ø 500, 630, 800 mm, AC or EC motor Benefits: High efficiency geometry Modular design, 1-16 fans Piping in copper or stainless steel AISI 304 Finned pack available in a wide range of materials Complete range of accessories, 8 sound levels Premium series available for fans Ø 500 and 630 mm Casing in galvanized steel, powder painted

TKMicro H2O Modular Liquid Coolers

Performance range: capacity for each module up to 120 kW** Fans: Diamter Ø 800 AC and EC motor Modules: from 1 to n (**) Standard conditions - ΔT = 15k ethylene glycol 35%, Tw1=40°C, Tw2=35°C, T1=25°C

Super Power-J Dry Coolers

Performance range: Capacity from 290 to 2219 kW (ethylene glycol 35%, Tw1=40°C, Tw2=35°C, T1=25°C) Fans: Diameter Ø 800, 900, 1000 mm, AC or EC motor Benefits: Maximum performance, minimum footprint High efficiency geometry Modular design, 8-20 fans 8 sound levels Piping in copper or stainless steel AISI 304 or AISI 316L Finned pack available in a wide range of materials Complete range of accessories AFS (Air Fresh System) o WFS (Wet Fin System), available upon request

Power-J Dry Coolers

POWER-J DRY COOLERS (1 FAN ROW) Performance range: Capacity from 70 to 961 kW (ethylene glycol 35%, Tw1=40°C, Tw2=35°C, T1=25°C) Fans: Diameter Ø 800, 900, 1000 mm, AC or EC motor Benefits: High efficiency geometry Modular design, 2-7 fans 8 sound levels Piping in copper or stainless steel AISI 304 or AISI 316L Finned pack available in a wide range of materials Complete range of accessories AFS (Air Fresh System) o WFS (Wet Fin System), available upon request POWER-J DRY...

Power-Line Dry Coolers

POWER-LINE DRY COOLERS Performance range: Capacity from 8 to 890 kW (ethylene glycol 35%, Tw1=40°C, Tw2=35°C, T1=25°C) Fans: Diameter Ø 500, 630, 800, 900, 1000 mm, AC or EC motor Benefits: High efficiency geometry Modular design, 1-10 fans 8 sound levels Piping in copper or stainless steel AISI 304 or AISI 316L Finned pack available in a wide range of materials Complete range of accessories Casing in galvanized steel, powder painted POWER-LINE DRY COOLERS (2 FAN...